Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Code Block
disallow=all
allow=opus:20,g729:20,alaw:20,ulaw:20,vp8,h264,h263,h263p
  • Run the command:
Code Block
callweaver -rx “sip reload”

Trunks

Enable Q-value (serial forking) for trunk registration

...

  • Copy registration line for some trunk from /etc/callweaver/sip-registration.conf (Example: register => 144?144:123456:”144″@10.168.0.144:5060)

  • Uncheck Enable registration option in Trunk Settings (WMS -> Trunks)
  • Add new line into /etc/callweaver/sip-general-custom.conf: register => 144?144:123456:”144″@10.168.0.144:5060~~0.6 (where 0.6 is q-value)
  • Run the command: 
Code Block
callweaver -rx “sip reload”

Enable sending keep-alive packets via UDP packets to keep RTP ports opened

...