Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Info

The steps below help you to connect and configure the W01FXS, W02FXS 2015 and W04FXS media gateways. FXS gateway allows you to connect analog phones and fax machines to your IP PBX.

Other FXS Useful links:

Guides: 

Updated: March 2017

Permalink: https://confluence.wildix.com/x/XQg8AQ

...

Connect the FXS gateway using the power supply and the cable provided with the gateway, as it is shown on the picture:


PDF avoid Pagebreak

Image RemovedImage Added


Connection to Ethernet

The gateway has one LAN port configured in Bridge mode and one WAN port set up as a DHCP Client. Connect one of two ports to the same network as the PBX or an external DHCP server (for instance, its router) as shown on the picture:


PDF avoid Pagebreak

Image RemovedImage Added


As soon as the DHCP server assigns an IP address to the gateway, you can pass to the next step of the gateway configuration.

...

FXS gateways have 1 or 4 ports (depending on the model) on the rear panel, marked as Phone1-Phone4. Connect the ports to the analog phones.


PDF avoid Pagebreak

Image RemovedImage Added

Provisioning of the gateway

...

  • use the paper clip or the object of the similar shape to press the button
  • keep the button pressed for 5 seconds
  • when the LED Status turns on, the reset of the gateway is complete

PDF avoid Pagebreak

Image RemovedImage Added


Control calls using Flash button

...