Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.


  • Go to /usr/src/: cd /usr/src/

  • Download the PBX image from the link:http

    • use the command: wget [link]

  • Unpack the archive wildix_pbx_install.tar.gz:

    • use the command: tar xzf [archive_name]

  • Change the network interface name. This step is necessary for Linux distributions with Udev version starting from 197, since in this version the network interface has a generic name format (is different from “ethX”):

    • open file /etc/default/grub

    • add option “net.ifnames=0″ in line GRUB_CMDLINE_LINUX=”net.ifnames=0”

      • for Debian: run update-grub2

      • for CentOS: run grub2-mkconfig -o /boot/grub2/grub.cfg

    • reboot

    • after host system reboot, you need to manually verify that the correct interface naming format was applied:

    • for Debian: cat /etc/network/interfaces

      • the output should contain a line similar to this one (it can vary depending on system configuration): iface eth0 inet dhcp

      • “eth0” in this line is the interface name, which means, the naming format has been successfully changed (by default modern debian-like systems contain ens32 interface naming).