Skip to end of metadata
Go to start of metadata


Oct 21, 2020 19:31

Wizyconf-Mic Installation Guide

This guide explains how to install Wizyconf-Mic - table and ceiling installation

Created: September 2019

Permalink: https://confluence.wildix.com/x/zAJKAw

For more details about how to connect all the components of the Wizyconf to the Wizyconf-Core, consult the page Wizyconf Conference Room - Documentation.

Packing List

The following components of the Wizyconf box refer to the Wizyconf-Mic and Wizyconf-Array:

  • 2 x microphone ball
  • 1 x Wizyconf-Array box   
  • 2 x mount bracket
  • 2 x ceiling mount cable protection
  • 2 x Wizyconf-Mic box
  • 1 x power supply with US, UK, EU plugs
  • 2 x audio control cable
  • 2 x rigid cable (50cm)
  • 2 x rigid cable (20cm)
  • 2 x soft cable (53cm)
  • 2 x 4 screws for mounting
  • 1 x package of 4 support legs for Wizyconf-Array
  • 1 x package of 8 support legs for Wizyconf-Mics

Connection

Wizyconf-Array Overview 

Important: attach the four legs at the bottom of Wizyconf-Array (package of 4 support legs).

Wizyconf-Mic Overview

Important: for table installation attach four legs at the bottom of each Wizyconf-Mic (package of 8 support legs).


Wizyconf-Array: port definition

Port Name

Description

DC 12V

Connect to the power supply.

Mic

Microphone analog connection.

Connect to Wizyconf-Core using audio control cable.

Ref-audio

Reference audio analog connection.

Connect to Wizyconf-Core using audio control cable.

Connect to “  Mic”

Connect to Wizyconf-Mic 1.

Wizyconf-Mic: port definition

Port Name

Description

Status Indicator

Steady red: system starting.

Steady green: clock synchronization (takes 10-30 seconds).

Flashing green: clock synchronization finished; working status.

Connect to “  Array”

Connect to the Wizyconf-Array.

Connect to next “  Mic”

Wizyconf-Mic 1 only: connect to Wizyconf-Mic 2.

Connect to prev. “  Mic”

Wizyconf-Mic 2 only: connect to Wizyconf-Mic 1.

Wizyconf-Array and Wizyconf-Mic Connection Scheme

  • Connect the Wizyconf-Array to the ports "Mic" and "Ref-audio" of the Wizyconf-Core using the Audio control cables (included) 
  • Connect the Wizyconf-Array to the power supply
  • Connect the Wizyconf-Array to the first Wizyconf-Mic as shown on the scheme below, and the first Wizyconf-Mic to the second Wizyconf-Mic using RJ-45 cables (not included):  


Wizyconf-Mic Installation

Desk Installation

For installation on a table:

  • Make sure you have attached four support legs at the bottom of each Wizyconf-Mic
  • Attach the rigid cables to the Wizyconf-Mics and the microphone balls  
  • You can bend the microphone cable so that the top of microphone ball is located closer to the people who speak

Ceiling Installation

For ceiling installation: 

  • Attach the soft cables to the Wizyconf-Mics and the microphone balls  
  • It is recommended to use the provided mount cable protection (to protect the cable when installing the microphone in the ceiling)
  • Make sure the ceiling can support the weight of the Wizyconf-Mic (one unit = 0.3 kg)
  • The length of one soft cable is 53cm. If your ceiling is higher than 3.05m, it is recommended to install the microphones on the table

Suspended ceilings

Follow the instructions:

For ceilings that are not suspended:

Note: the recommended distance between the two microphones is from 5.5 m to 7.6 m (18''-25'').

Not finding the help you need?
Join the Facebook group to ask a question!
facebook_tech-wizards