How to set SRTP from local phone to PBX
Nov 18, 2019 07:19
This document describes how to set up SRTP from a local phone to a PBX. Traffic from the local device to the PBX will use SRTP.
Created: October 2019
Edit Dialplan procedure used for managing outgoing calls ("users" by default):
- 0. -> Set RTP security inc -> Dial the trunk
The example uses Classound. The trunk can be any trunk.
Edit Dialplan procedure used for managing incoming calls ("main" by default):
- DID numbers -> set RTP security out -> dial the phone XXX